MCK | ADVANCED KIT (All Model Options)

videos

HANDGUN COMPATIBILITY

MASTER COMPATIBILITY GUIDE

HANDGUN COMPATIBILITY

Open your handgun manufacturer below and confirm the exact model, generation, caliber, barrel length and configuration before ordering.

Important: Compatibility may vary by exact handgun variant, slide configuration and selected product option. Do not order based only on visual similarity.

GLOCK VIEW MODELS

G17 / G19 / G19X / G31 / G32 / G45 / G47 Gen 3–5 configurations, as applicable

G22 / G23 Gen 3–4

G17 / G19 / G22 / G23 / G31 / G32 Gen 1–2

G43 / G43X / G48 Slimline configurations

G26 / G27 Subcompact configurations

G20 / G21 Large-frame configurations

G34 / G35 / G41 Long-slide configurations

G30 / G30SF / G30S Compact large-frame configurations

G44 Compact .22 LR

SIG SAUER VIEW MODELS

MCK 1.0 P365 SERIES

P365 X, P365 XL and P365 SAS

MCK 1.0 P320 SERIES

P320 Full-Size, P320 Compact and P320 Carry

SMITH & WESSON VIEW MODELS

MCK 1.0 M&P SHIELD 9MM

Compatible with Smith & Wesson Shield 9mm.

Not compatible: Shield Plus, .40 Cal, EZ, Performance Center or models with an integral laser.

Manual-safety models fit, but the safety cannot be accessed while installed.

MCK 1.0 M&P 1.0 / 2.0 COMPACT

Compatible with Smith & Wesson M&P 1.0 and M&P 2.0 Compact.

Not compatible as configured: Thumb-safety models, Performance Center, SW9VE, .45-caliber M&P, M2.0 Metal Series, suppressor-height sights, threaded barrels or suppressors.

The manual-safety lever must be removed from a thumb-safety model before use. First-generation units may display “2.0” markings; this is normal.

MCK 2.0 M&P 2.0 — 4″ BARREL

Compatible with Smith & Wesson M&P 2.0 handguns equipped with a 4-inch barrel.

Suppressor-ready and compatible with suppressor-height sights. Supports compatible suppressors up to 1.38″ outside diameter.

MCK 1.0 SD SERIES

Smith & Wesson SD9VE and SD40VE

SPRINGFIELD ARMORY VIEW MODELS

MCK 1.0 HELLCAT STANDARD / OSP

Compatible with Springfield Hellcat Standard and Hellcat OSP.

Not compatible: Hellcat RDP or Hellcat Pro.

Not suppressor-ready.

MCK 1.0 XD / XD MOD.2 / XDM — .45 ACP & 10MM

Compatible barrel lengths: 3.8″, 4″, 4.5″ and 5″. Model, caliber and barrel length must all match.

Not compatible: XDM Elite, XD-E, single-stack XDS, threaded barrels, suppressor-height sights or barrels under 3.8″ or over 5″.

MCK 1.0 XD / XD MOD.2 / XDM / XDM ELITE — 9MM

Compatible barrel lengths: 3.8″, 4″, 4.5″ and 5″. Model, caliber and barrel length must all match.

Not compatible: XD-E, single-stack XDS, threaded barrels, suppressor-height sights or barrels under 3.8″ or over 5″.

TAURUS VIEW MODELS

COMPATIBLE MODELS

G2C G3 G3C G3X G3XL PT111 Millennium

CANIK VIEW MODELS

MCK 2.0 TP9 ELITE SERIES

TP9 Elite SC, TP9 SF Elite, TP9 Elite Combat and TP9 Elite Combat Executive.

TP9 Elite SC requires the included Elite SC gun door. Combat and Combat Executive models without the optic plate require the included alternate charging handle.

MCK 2.0 TP9 / METE SERIES

TP9SF, TP9SA Mod.2, TP9SFT, TP9SFX, METE SFT and METE SFX.

Not compatible: SFX Rival, METE SFT Pro or METE SFX Pro.

CZ VIEW MODELS

MCK 2.0 COMPATIBLE MODELS

CZ P-07, CZ P-09 and CZ P-10

RUGER VIEW MODELS

RUGER RXM

Compatible Ruger RXM configuration.

PALMETTO STATE ARMORY VIEW MODELS

PSA DAGGER

PSA Dagger Full and PSA Dagger Compact

MCK 1.0 limitation: Configurations identified as MCK 1.0 are not suppressor-ready and are not designed for suppressor-height sights unless a product-specific note explicitly states otherwise.

Specifications

SPECIFICATIONS

MCK 2.0 Platform Dimensions

Construction

Polymer + Aluminum

Weight

33.16 oz

Length — Open

22.32 in

Length — Folded

13.70 in

Maximum Width

2.48 in

Maximum Height

6.10 in

FEATURES

MCK 2.0 PLATFORM

Compact. Modular. Ready to Configure.

The MCK 2.0 is a model-specific conversion platform designed to improve stability, control and handling while providing a compact folding configuration and extensive accessory mounting space.

Tool-Free Installation

Installs without handgun disassembly or permanent modification.

Folding Configuration

Folds into a compact profile for convenient storage and transport.

Picatinny Rail System

Supports compatible optics, lights and additional rail-mounted accessories.

Ambidextrous Operation

Designed for practical operation by right- and left-handed users.

FAQ

FREQUENTLY ASKED QUESTIONS

MCK 2.0 Basic Kit FAQ

Can I use a ported or compensated barrel?

No. Use only a standard, non-ported and non-compensated barrel.

Can I use a slide-mounted optic?

No. Compatible optics should be mounted directly on the upper Picatinny rail.

Is the MCK 2.0 suppressor ready?

Yes. It supports compatible suppressors with a maximum outside diameter of 1.38 inches.

Can it operate while folded?

Yes. The platform is designed to remain operational with the compatible rear configuration folded.

Does one MCK fit every handgun?

No. Select the exact product option intended for your handgun model and generation.

Is the MCK legal in my location?

Laws vary by jurisdiction and configuration. Confirm all applicable local regulations before purchase or use.

WARRANTY

Warranty & Product Support

Warranty eligibility and service are governed by the applicable manufacturer warranty policy.

Damage resulting from improper installation, an incompatible handgun configuration, unauthorized modification or misuse may not be covered.